iCLT System

The right system for passive houses

Systém iCLTSystém iCLT

iCLT stands for intelligent cross laminated timber, iCLT are massive wooden panels used for both residential and civil buildings. Panels are made of three up to five layers of perpendicular planks that are equalized to be 27 mm thick. The planks are held together with wood screws placed in regular pattern. The top and bottom panel edges are covered with tape that protects the panel from bad weather conditions.

iCLT – selected construction options

iCLT nameUseNote
iCLT 81Internal wallsBasic panel. Possible to be used for external walls when not necessary to be air tight (warehouses)
iCLT 81 FExternal wallsPanel with integrated paper membrane*
iCLT 81 SInternal wallsPanel with higher static bearing capacity
iCLT 81 BInternal wallsPanel with the top layer made of bioplate**
iCLT 81 BFExternal wallsPanel with the top layer made of bioplate** and with integrated paper membrane*
iCLT 81 BFS
Panel with higher static bearing capacity, with the top layer made of bioplate** and with integrated paper membrane*
iCLT 108 BInternal wallsFour-layer panel with bioplate**
iCLT 135Internal wallsBasic panel. Possible to be used for external walls when not necessary to be air tight (warehouses)
iCLT 135 FExternal wallsPanel with integrated paper membrane *
iCLT 135 BInternal wallsPanel with the top layer made of bioplate**
iCLT 135 BF
Panel with the top layer made of bioplate** and with integrated paper membrane*
*Standard with of the membrane min. Sd = 4,45 m. The membrane is integrated under the first layer of wood from the exterior side
**Bioplate – visually appealing glued wooden panel

Production line

iCLT is manufactured using patented technology without using any glues while keeping the energy costs very low. The basic raw material is wooden plank (usually spruce or pine) equalized to be 27 mm thick with mainly European origin. The layers are mutually perpendicular connected by wood screws placed in regular pattern.

Patented manufacturing enables production of panel sizes up to 3,500 x 12,500 mm. Given the higher ceilings and thicker floors requirements in modern buildings, the final construction can be made of lower number of panels. Fewer panels result in faster assembly times at the construction site.

Five-axis portal centre enables any processing

  • Boring for sockets
  • Creation of grooves and half-grooves
  • Bore milling of any shape
  • Boring for connecting tools
  • Perpendicular cutting under given angle
  • Working on arched elements

Panel supply includes subsequent constructions.

Processing possibilities:

  • complete processing of rafters, precise shortening, wood tapping, drilling and more carpentry
  • four side planing available for the visual parts
  • visually appealing finishing of rafters and purlins
  • solutions for non-standardized wooden constructions (church towers etc.)

Manufacturing

Because of the modern CMC production line we can produce iCLT panels up to 3.5 x 12.5 m.

Manufacturing
Manufacturing

Assembly

Given the precise manufacturing the on-site assembly is very quick with total assembly times of one week.